Get the latest price?

How to detect insufficient output power of a generator set?

The fuel filter of the generator set is blocked and the fuel supply is not smooth; the fuel oil pipeline is leaking, and air seeps into the fuel inlet pipe; the engine air filter of the generator set is blocked and the intake is not smooth; the fuel temperature is too high; the engine exhaust The pressure is too high; the oil level is too high, which creates resistance to the crankshaft and causes a loss of engine power; there may be air leakage between the rear end of the engine supercharger and the engine intake manifold, resulting in insufficient intake pressure. Bidirection Power Technology Co., Ltd. introduces effective measures to detect insufficient output power of generator sets: 1. Check the fuel filter element, if it is blocked or there are a lot of impurities, please replace the fuel filter; 2. Check the fuel supply pipeline, and if there is any leakage, deal with it to prevent air from entering the fuel supply pipeline when the engine of the generator set is running; 3. Check the air filter element, clean it with compressed air or replace the element; 4. Measure the fuel temperature. If the fuel temperature exceeds 50℃, please cool down the fuel or add fuel to lower its temperature; 5. Check the exhaust pipe of the engine to ensure that the exhaust pipe is unobstructed and that the exhaust pressure is less than 90mmhg. In the cold state of the generator set or after 5-10 minutes of shutdown, check the oil level of the oil pan with a dipstick. If the oil level has exceeded the "H" level, please drain the excess oil and keep the level at "L" It is advisable to be close to the "H" position between the "H" position and the "H" position; in operation, check the air pipe between the rear end of the turbocharger and the intake manifold with the necessary tools (pay attention to prevent burns caused by high temperature and high pressure gas ), tighten the leaking parts.

Get the latest price? We'll respond as soon as possible(within 12 hours)